Forums DIY and Mods Splitin a K2 Recon
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #566927
    Split_in_AK
    3 Posts

    Alright so heres the deal i’ve got an extra board and its a k2 recon. i was wondering if it would be possible to split it useing the split kit. any information would be helpful.

    #583781
    mtnrider
    740 Posts

    I’m not sure about the Recon but I know if certain year Recon Risers that K2 put some foam in there under the risers. I don’t think your board is like that but I’d try to check and see what is in the core for sure. Otherwise, that is one of my favorite boards. I think it would be a great split.

    #583782
    mtnrider
    740 Posts

    I’m not sure about the Recon but I know of certain year Recon Risers that K2 put some foam in there under the risers. I don’t think your board is like that but I’d try to check and see what is in the core for sure. Otherwise, that is one of my favorite boards. I think it would be a great split.

    #583783
    Split_in_AK
    3 Posts

    how would i check to see if there was foam under the risers?

    #583784
    NJAB
    29 Posts

    Cut it in half and see 😀

    I’m not familiar with the recon. But if its an older K2 (10+), the core is most likely partly foam. I guess if you can’t find spec information, you might be able to make an assumption based on the weight of the board. K2’s foam-core boards were pretty light.

    #583785
    mtnrider
    740 Posts

    @Split_in_AK wrote:

    how would i check to see if there was foam under the risers?

    You mentioned above that you have a RECON. That is the same board as the RECON RISER WITHOUT the riser pads, so I doubt you have foam in it.
    Do you know what year board it is?

    #583786
    Split_in_AK
    3 Posts

    the board is only 2-3 years old

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.