Forums Bindings Spark R&D spark r&d blaze – pretty pictures, sweet clamps
Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #573960
    Tap
    126 Posts

    Venture Storm 170-26 / Spark R&D Blaze

    set-up clean

    super light aluminum pins. Venture full sidewall.

    LT Touring brackets.

    System lines up well in walk mode. Bushings inside the touring brackets seem to slide fine.

    full set-up.

    Venture middle seam in ride mode…freaking so clean and tight….clinical precision.

    i have no ride report yet, storm hits tonight and we’re hammered here in OR for the week!

    time to ride!

    #633561
    Snurfer
    1448 Posts

    Wow! that is a rad setup…

    Shark Snowsurf Chuna
    Voile V-Tail 170 BC
    Voile One Ninety Five
    Spark R&D Arc

    #633562
    samh
    726 Posts

    Some gorgeous photos here let me tell ya’. You may want to put the shims back under the touring brackets though. You’ve got a bit of space there. I found I had the same problem with mine.

    --
    samh.net

    #633563
    Kyle Miller
    510 Posts

    Those touring brackets really are amazing. With both the Blazes and the brackets there is soo much more surface which makes the skin mode feel way more stable.

    Nice setup by the way.

    #633564
    bcrider
    4150 Posts

    Damn. That is one steezy looking set-up! :thatrocks:

    #633565
    russman
    692 Posts

    So so sick dude!

    I’m down with the colors!

    #633566
    Spark RD
    8 Posts

    Looking good Tap!!!

    #633567
    dafu
    49 Posts

    the instructions say no shims under the touring bracket but like you I have play
    is there a good reason not to put them under the bracket.
    cus I have!
    the Mr chomps appear to work fine with the shims under……I am missing something Will?

    #633568
    Will
    377 Posts

    Hey Dafu,
    Our first runs had countersinks that were a little too deep, so you can either use the shims as you are or we’ll hook you up with some M6 x 10mm screws (the standard ones are M6 x 12).

    Thanks!

    #633569
    peacefrog
    376 Posts

    Will,
    Can you talk to us about the straps that are attached to your heal lifters? They look like they’d make kick turns on steeps slops and side hill climbs easier.

    #633560
    FloImSchnee
    291 Posts
    #633570
    dafu
    49 Posts

    Will Shims are fine… I just didnt want to make a balls up (breaking something or loose a crampon) just because I didnt follow your instructions.

    #633571
    Zee
    136 Posts

    Those look really nice. Very good craftsmanship.

    #633572
    walove
    65 Posts

    “Will,
    Can you talk to us about the straps that are attached to your heal lifters? They look like they’d make kick turns on steeps slops and side hill climbs easier.”

    i would like to know too. Are they a limiting strap and attach to the binder to keep the board closer to the boot?, or just a helper strap to pull up the climbing bar.

Viewing 14 posts - 1 through 14 (of 14 total)

You must be logged in to reply to this topic.