Forums Splitboard Talk Forum Spark baseplate/Rear entry straps,highback?
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #574748
    lewmt
    570 Posts

    Even possible without a CNC machine or very exacting drill skills? I know that these bindings are typically heavier but my main purpose would be for snow kiting where the weight isn’t so critical & the ease of snapping in is really handy.

    Also curious of others’ thoughts on which rear entry binding they like best? If there’s been big gains in weight(reduction) with the Flows? Are the Gnu rear entry binders any good? Nothing critical – I’ve had no serious issues with sparks & kiting just see how handy it is with the rear entry rigging for take-off & finishing out a session with the kite.

    #639523
    Killclimbz
    1165 Posts

    Flows are actually some of the lightest bindings out there. So no real weight penalty with them.

    I haven’t heard anything yay or nay about the GNU models. The Cinch also works fine, but it is a bit on the heavy side. Overall, for what you are talking about, I think Flow would be ideal.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.