Forums Splitboard Talk Forum Puck alignment guide blueprint? Viewing 8 posts - 1 through 8 (of 8 total)Author Posts February 28, 2012 at 11:57 pm #576499 Swedish-banana 147 PostsHey! Just picked up a split the other day but I didn’t get an alignment tool with it. Are you suposed to get one? I put the pucks on but I have a hard time getting them just right. Does anyone have a blueprint or some measurements? That way I could make my own in paper/cardboard or something.Thanks! February 29, 2012 at 12:10 am #652661 Jefe009 675 PostsI had the same problem, my split didn’t come with the alignment tool. Instead, what I did was this:Get your stance like you want it with the pucks.Tighten the pucks ALMOST tight (they can still move a bit).Slide on your bindings or plates. This should bring the pucks into exact alignment.Slide off the bindings or plates slowly and carefully. Make sure to slide them straight back to keep the alignment of the pucks.Tighten the puck screws down all the way.Test your bindings/plates one last time to make sure you’re good to go.Go splitting!www.splitlife.net February 29, 2012 at 12:30 am #652662 animalchin 38 PostsI just sort of eyeball it, I have the guide but I find when I use it the pucks are too far apart so my pins won’t slide through. Has anyone had any issues due to slightly misalinged pucks? I have mine a bit off but I find that makes it so the hooks line up better once I slide the bindings on. February 29, 2012 at 12:37 am #652663 firstlight 721 PostsGuysGet them here $8 cheep Or ring and they may send one for free! CheersAdam Westwww.firstlightsurfboards.com.au www.firstlightsnowboards.com.au www.splitfest.com.au www.snowsafety.com.au www.mrbc.com.au www.backcountryglobal.com www.alpinefirstaid.com.au February 29, 2012 at 2:36 am #652664 Swedish-banana 147 Posts @firstlight wrote:GuysGet them here $8 cheep Or ring and they may send one for free.Cheers Yea I saw that. 8 bucks no problem but they want 30 bucks in shipping! Crazy! February 29, 2012 at 2:58 am #652665 straightliner 36 Postshttp://www.voile-usa.com/Merchant2/merchant.mvc?Screen=PRODUCT-INSTRUCTIONS under Splitboards download the universal splitboard interface instructions. February 29, 2012 at 3:45 am #652666 CO_Bucs 29 PostsJust email Voile and tell them that you didn’t get one with the your new set up. The puck guide is supposed to be there (if you had Voile interface installed/available with the board). They will send you one for free + free shipping. Good people. February 29, 2012 at 3:47 am #652667 Swedish-banana 147 Posts @CO_Bucs wrote:Just email Voile and tell them that you didn’t get one with the your new set up. The puck guide is supposed to be there (if you had Voile interface installed/available with the board). They will send you one for free + free shipping. Good people.Thanks! I will try that. Viewing 8 posts - 1 through 8 (of 8 total)You must be logged in to reply to this topic.