Forums Snowmo Splitters Painting hoods Viewing 7 posts - 1 through 7 (of 7 total) Author Posts November 8, 2010 at 5:36 am #573560 bcrider 4149 Posts Any one have any tips for painting a hood? I’m not looking to win any beauty contests and dont want to spend any money to have it done professionally? Will spray paint be ghetto? November 8, 2010 at 9:14 am #630977 chrisNZ 304 Posts Get screen printing paint, mesh screen and rubber roller. Cut stencil and roll paint on. November 8, 2010 at 7:13 pm #630978 imported_MountainDog 160 Posts Is that for hoods or hoodies? November 9, 2010 at 5:17 pm #630979 bcrider 4149 Posts @mountaindog wrote: Is that for hoods or hoodies? My thoughts too. Methinks this would not be the preferred method for painting a snowmo hood. 🙂 November 9, 2010 at 5:31 pm #630980 PedroDelfuego 758 Posts @bcrider wrote: Will spray paint be ghetto? Ghetto Fabulous!!! You should airbrush an eagle or something equally bad ass! Its all about the surface prep and finishing coats; you can paint what ever just prep and seal it good. PS: I was totally serious about the eagle. October 23, 2011 at 3:47 am #630981 liketoride 263 Posts Spray paint is bad for the environment… 😆 Splitboarding is the answer unless Splitbooting is the answer, either way we're going snowboarding because America! October 23, 2011 at 5:24 am #630982 samh 726 Posts Whatever you decide in terms of technique, just make sure there is an eagle involved in the final design. -- samh.net Viewing 7 posts - 1 through 7 (of 7 total) You must be logged in to reply to this topic.