Home › Forums › DIY and Mods › Other Bindings That Work With Spark R&D Baseplate?
- This topic is empty.
- AuthorPosts
- January 28, 2010 at 4:31 pm #572913
Doctor BananasParticipantDoes anyone know any other binding parts that would work with the Spark R&D baseplates, other than Bent Metal?
January 29, 2010 at 5:00 pm #625575bcriderParticipantPretty much any….
you just need a drill and possibly sheet metal scissors (to cut plastic) for the mod.
February 2, 2010 at 9:57 pm #625576SRAParticipantI put some K2 high backs on my Sparks sans drilling or cutting. I found that the Bent Metal high backs weren’t very comfy for my skinny calfs.
February 23, 2010 at 6:02 pm #625577IncalescentParticipantI completely Burton’d my Sparks baseplates. Xacto blade, drill, and hacksaw.
http://goldenincalescent.blogspot.com/
February 23, 2010 at 9:50 pm #625578jcocciParticipantYou should be able to out any straps on there without modification. I was able to put some Sims highbacks on without modding. I did have some other Sims highbacks that I wanted to use but couldn’t get to work and didn’t want to hack them.
May 2, 2010 at 6:30 am #625579ausplitParticipantI’m thinking of buying a set of fuse base plates and have a set of ride cad bindings to cannibalize.
Does anyone know if the cad highback will fit?May 2, 2010 at 9:37 pm #625580ColinParticipantalso interested if anyone’s tried newer drakes?
May 3, 2010 at 4:31 am #625581burtonParticipantFOTOS , PICTURES ?
Burton
May 5, 2010 at 1:31 pm #625582ZakParticipantI’ve been using union force highbacks and burton straps (ultrastrap air and ultracap). They were the lightest highbacks I had in my binding pile (burton, ride, etc). They also had holes that lined up perfectly, so I didn’t have to drill and cut. I did have to shorten the hardware for the ankle straps, that just took a quick trip to the bench grinder.
- AuthorPosts
- You must be logged in to reply to this topic.