Forums Splitboard Talk Forum need some advice Viewing 3 posts - 1 through 3 (of 3 total) Author Posts June 15, 2008 at 11:37 pm #570176 waltzingmatilda 74 Posts So I went out on a little spring trip, came home and left my split in my car the next day with the skins still on . It was a pretty warm day and the skin glue had gotten warm enough to melt onto the base of my board. I now have a board with tons of skin glue on the base. Any suggestions on how to get this stuff off? I know I’m a dumb ass for letting the board sit in a hot car, but I spaced on bringing the stuff in. I tried ironing with brown paper bag underneath. No luck. I tried scraping. Should I try Goof Off or some kind o thinner? Any suggestions would be much appreciated. June 15, 2008 at 11:50 pm #606475 Mumbles 753 Posts I recommend scraping the larger areas off with a flat scraper and then use some citrus base cleaner and a buffing pad. It will trash the buffing pad, so use one that has little life left. I did that to a burton board with older burton skins and it worked pretty nice. After the base cleaner it then prompted me to rewax the board. June 16, 2008 at 1:53 pm #606476 waltzingmatilda 74 Posts Thanks Mumbles, the citrus cleaner did the job along with a little wd40. 🙂 Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.
