Forums Splitboard Swap FS : Scarpa Denali XT 25.0 Viewing 6 posts - 1 through 6 (of 6 total) Author Posts August 24, 2005 at 9:50 pm #566772 dacksdescents 50 Posts For Sale: Used Denali XT 25.0 With thermo liner. Heavily used but has plenty of life left. Just had the instep cable buckles and inner cuff rivits replaced by BD warrenty. Shells… $100 liners… $50 plus shipping August 24, 2005 at 10:22 pm #582666 Eric 60 Posts What is the size range for the 25 shell? The overlap should be marked inside somewhere (I think its on the cuff an tounge of older denalis). Thanks ❗ August 27, 2005 at 9:29 pm #582667 dacksdescents 50 Posts the shells are marked 5.5-6 located inside heel on the outside of the shell. the tongue is marked 6/7 the liners are marked 25.0. what shoe size do you wear or have you worn any other scarpa boots? September 11, 2005 at 4:51 pm #582668 Eric 60 Posts After some looking it seems that Scarpa overlaps from the half size up, ie 24.5 to 25, 25.5-26. I think my 27’s are to big in the shell, but I think these would be just a bit to short. That said, I would appreciate and actual measurement of the liners sole length in cm if you still have em, nad I’d love a pic or two of the shells, just in case. Thanks! September 11, 2005 at 6:18 pm #582669 dacksdescents 50 Posts It’s really not accurate to measure the length of a molded liner. I did and its between 250-260mm depends were you measure from and where you stop measuring. they are a 25.0 liner. I recommend that you go to the BD store since your in SLC. try on a pair of AT boots in a 25 and in 25.5. If the 25’s work then these will fit. If they don’t work and the 25.5’s are in a larger shell size then these won’t work. I can email some pics if you wan’t I just need an email address. September 14, 2005 at 1:32 am #582670 dacksdescents 50 Posts Sold Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic.