Skip to main content

Home Forums Splitboard Swap FS: Hardboot stuff – Phantom parts, Dynafit TLT6, Bomber, Verts, Crampons, etc.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #828199
    Zak
    Participant

    Hey guys, gauging interest in my hard boot setup. With a new baby I’m riding really sporadically and goals have changed so I’m thinking I should probably unload this setup to someone that will get some use out of it.

    Full setup of all red anodized Phantom bindings, Dynafit Speed Techlite toes, and Rocket Risers. I purchased these new in 2015, but haven’t used them since 2016 due to a lack of riding time. Includes splitboard cleats (multi position) and small screwdriver for adjustments. Size medium for BSL 277-307. SOLD

    Highly modified Dynafit TLT6 boots in size 26/26.5 shell (287mm sole length) – the cuffs are cut down, the sides slit for lateral flex, and the forward lean block has been hollowed out quite a bit. They also have the Phantom strap relocation kit installed. Stock 26.5 liners are unused, also includes used Intuition ProTour liners in 26, stock removable shell tongues, and Eliminator liner tongues. In great shape, barely used shells. $300

    Vert cleats for Phantom bindings (orange) – SOLD

    Dynafit 130mm crampons – SOLD

    BD Neve Pro step in crampons new – $100

    Silver Phantom Solo Cleats new (set angle – +/- 15 and 3 degrees) – SOLD

    A bunch of extra Phantom parts including baseplates (prototype lighter ones, not recommended for heavier riders), bail blocks, cants, hardware, and heel riser adapters with Voile dual heel risers. Add your own bails, cleats, and tech toes for a full setup. SOLD

    Bomber TD1 plate bindings with 3 mounting discs, one flat and two with progressively more cant to them (not sure what angles) so you can ride hard boots at the resort. $100

    Pics here – https://drive.google.com/open?id=1xubGpfIhEXtHU0W276sc-rEXY6x8Wxww

    #828308
    UpperDaze
    Participant

    Potentially interested in the Phantom stuff. Pics? Where you located?

    #828444
    Zak
    Participant

    Hey sorry about the slow reply, I don’t seem to be getting email notifications from the forum. I’m in Salt Lake City, if you PM me your email address I can send pics.

    -Zak

    #828747
    shad
    Participant

    Hey Zak,

    Check your PMs. I live in SLC, too, and I’m interested in buying your setup.

    Shad

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.