Skip to main content

Home Forums Splitboard Swap FS: Dynafit Speedfit Boots 27.5 Modified

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #847566
    UpperDaze
    Participant

    Hey everyone. I have a lightly used pair of Dynafit Speedfit Boots size 27.5 that I am looking to unload. I love these boots but unfortunately after about 10 days on them I have come to the conclusion that they are just a bit too small for me (I am a size 11 street shoe for reference, so if you are roughly size 10-10.5 these may work well for you). I modded these according to Phantom’s instructions. Here’s what I did –

    – replaced stock cuff rivet with removable axle/hardware kit from B&D
    – relocated lower buckle to cuff pivot point
    – modified forward lean plate to increase forward lean
    – increased lateral flex by slightly cutting down lower portion of boot shell with dremel tool

    I am located in SLC so if you are local and want to come check them out then you are more than welcome to, otherwise I would be happy to ship them. Thinking $250 for the pair (new was $599 + $100 for the pivot kit + lots of other small parts and time for modding) . Message me on here or feel free to email me at erscott77 at yahoo. I will try to upload pics later.

    Thanks!

    #847600
    Steven
    Participant

    I sent you an email with specific questions, but I am very interested!
    Thanks!

    #847605
    UpperDaze
    Participant

    SOLD

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.