Forums DIY and Mods DIY Burton Supermodel – Burton & VoilÃƒÂ© equipped Viewing 3 posts - 1 through 3 (of 3 total) Author Posts March 12, 2006 at 8:06 pm #567612 Jogi 158 Posts “burton” – the DIY-king of german forum http://www.erstespur.de – asked me to show you some pics of his latest job: a Burton Supermodel 73 from ’98 with Burton’s Yin/Yan-hooks and tip-/tail-clips. Pucks, touring brackets, slider tracks and climbing bars are by VoilÃƒÂ©. The “original” pucks have the VoilÃƒÂ© insert pattern to change angles. The cut has the color of the board and it has been supplemented with steel edges on a length of app. 75 cm (pic #2). Here are the pics: If you have questions please ask him, not me. 😉 I’m sure he will answer here the next days. March 14, 2006 at 8:12 pm #587344 bcrider 4149 Posts thanks for sharing jogi! nice work too burton. 8) did you round the topsheet? March 17, 2006 at 11:20 am #587345 burton 329 Posts hallo bc i rounded the corner a little , not like the out side . burton Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.