Forums Splitboards Custom crampons – General Q. how "deep" should crampons be ? Viewing 11 posts - 1 through 11 (of 11 total)Author Posts February 18, 2014 at 9:48 pm #579704 the_dragon_no1 43 PostsLike how deep in the snow should some good crampons go, from underside om board/skis ?I’m asking because I’m in the making of some, for my Voile DIY board.. and i might made them abit to deep :-! About 3″ .. to much 😕 ?? Made them kinda like Voile ones, design wise. February 19, 2014 at 1:07 am #675431 philip.ak 679 PostsMy Sparks are 2″ from the underside of the crampon to the tip of the longest tooth. February 19, 2014 at 7:35 am #675432 the_dragon_no1 43 PostsOkey thanks April 17, 2014 at 5:07 pm #675433 yeloblammo 38 PostsGood info. I was going to make a pair for this season but never got to it. I’ll have to this summer before next season.Another question:Most, I believe, mount to your binding. But in climb mode (which is when i would actually need the crampon) the crampon would need to be longer. Anyone have that mounts to the deck? i think I’ve seen some older models that mount to the deck. April 17, 2014 at 7:46 pm #675434 the_dragon_no1 43 PostsHere is how mine turned out.. Not aaaaall done yet tho.. still wanna shave of more weight.. realy wish i hade a cnc machine!!! 😀 but no….. So might pull out the old Dremel tool to finsih them..They work very well ! These suckers will not bend or anything, for shure !! 😉I made them to be fixed all the time, but been trying that for a few trips, and works good i think.. :thumbsup:Also made som custom, longer pins for the bindings, to make it all work 🙂🙂 April 18, 2014 at 1:44 am #675435 BobGnarly 220 PostsWay to go man! Diy power April 21, 2014 at 7:30 pm #675436 the_dragon_no1 43 Postsi now declare them Done! ……(i think, lol )next up… how to get them working 100% when in climbing mode…..? :scratch: :scratch: April 22, 2014 at 10:33 am #675437 FloImSchnee 291 Posts @the_dragon_no1 wrote:next up… how to get them working 100% when in climbing mode…..? :scratch: :scratch:You’d need something like those bars that are being used on Mr. Chomps: http://sparkrandd.com/gear/crampons/mr-chomps/ April 22, 2014 at 12:54 pm #675438 the_dragon_no1 43 Posts @FloImSchnee wrote: @the_dragon_no1 wrote:next up… how to get them working 100% when in climbing mode…..? :scratch: :scratch:You’d need something like those bars that are being used on Mr. Chomps: http://sparkrandd.com/gear/crampons/mr-chomps/ Thanks, yeah i found some videos on youtube of similar ones.. think that’s preaty much the only solution ! :thumpsup: April 22, 2014 at 10:53 pm #675439 BobGnarly 220 PostsYou could make something out of a bit of hinge material April 22, 2014 at 11:05 pm #675440 the_dragon_no1 43 Posts @BobGnarly wrote:You could make something out of a bit of hinge materialhmm. Good idea! I’ll figure something out 😉 Viewing 11 posts - 1 through 11 (of 11 total)You must be logged in to reply to this topic.