Forums Splitboard Talk Forum Binding adjustment – on the mountain now Viewing 4 posts - 1 through 4 (of 4 total) Author Posts March 16, 2011 at 7:02 pm #574574 FirstAscent 111 Posts Hey guys – I feel like I just had this problem with my split board (which I got fixed) Anyways – mounted new bindings on and I feel like I’m Always on my toes. So tie side turns are quick and easy but heel side is weird. Everything “looks” aligned and centered. Should I try adjusting it back a little anyway? Thanks for any input. March 16, 2011 at 7:11 pm #637965 summersgone 820 Posts Sounds like your forward lean set to far forward? Maybe bring it back a bit. I personally am not a huge fan of too much forward lean, and use hardly any. March 16, 2011 at 7:13 pm #637966 WhitePine 503 Posts It sounds like your weight isn’t centered over the width of the board. If your bindings are too far from your heel edge the torque required on your highback has to be greater in order to transition to that edge. If you have Sparks, try moving your heel cup back a notch. If you are using slider plates, mount your bindings back a few notches. This should balance out the ease of transitioning to both toe and heel edges. March 16, 2011 at 7:16 pm #637967 FirstAscent 111 Posts Thanks, forward lean is all the way back already Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.