Forums DIY and Mods Clicker modification for Verts Reply To: Clicker modification for Verts
4149 Posts

The Verts are pretty strong, you should be ok drilling through them, mine have been fine (although I really don’t use them too much).

I used the K2 Clicker snowshoe binding plate which is simpler and lighter than a full on binding but the price is right on your old SSTs so use em. I had to grind down some of the little traction spikes on the top of the snowshoe near where the binding goes. With the SST you may not need to. Also be sure to put your boot in the binding and center them on the snowshoe to mark the holes before drilling.

Hope that helps, here are some pics. 🙂

The stock Clicker Vert and my stripped down version.

Vert with Voile puck mod (with Voile slider track Clicker mod)


touring plate mod