• I founded Prowder because I was sick of the high prices and lack of splitboard technology. The technology has made leaps and bounds thanks to companies like Spark, Karakorum, Phantom and all the other innovators trying to make the sport better. When I read a posts like @ neversummer wrote it makes me second guess why I am selling products at…[Read more]

  • We just dropped the new artwork for the ATK Series.
    From left to right 152, 158, 162 sizes and corresponding artwork. Quiver collection baby!
    Enjoy!
    Prowder ATK Carbon Series Splitboards

  • I haven’t seen this issue before with our system. It sounds like the screws aren’t going all the way down.
    Are you using stock screws? Is there material in the bottom of the inserts preventing them from going down? Are you using M6 inserts, or fractional inserts? M6 inserts are the correct inserts to use. If you didn’t use some type of stop…[Read more]

  • I haven’t seen this issue before with our system. It sounds like the screws aren’t going all the way down.
    Are you using stock screws? Is there material in the bottom of the inserts preventing them from going down? Are you using M6 inserts, or fractional inserts? M6 inserts are the correct inserts to use. If you didn’t use some type of stop…[Read more]

  • I haven’t seen this issue before with our system. It sounds like the screws aren’t going all the way down.
    Are you using stock screws? Is there material in the bottom of the inserts preventing them from going down? Are you using M6 inserts, or fractional inserts? M6 inserts are the correct inserts to use. If you didn’t use some type of stop…[Read more]

  • prowder replied to the topic Not another binding in the forum DIY and Mods 8 years ago

    Good work! Good to see your ideas come to life!

  • Prowder Splitboard Systems:
    Metal on metal is a concern among many people with the Prowder Saddle System. I have a set of burners that I did the majority of my testing on the Spark products. After 3 years of testing the only sign of wear is some anodization scratches from earlier prototypes. The signs of wear on my Voile Light rails from testing…[Read more]

  • I thought I would post a link to the install video on the Prowder Interface.

    If you have any questions please call or email us at:
    sales@prowder.com
    1-303-601-7890
    ~Kevin

  • This is the correct setup for a factory splitboard.

    This is the correct setup for a DIY and factory snowboard.

    The slider with the “B” on it goes on the heal side or back of the Saddle setup.

    If you have any questions please call or email us at:
    sales @prowder.com
    1-303-601-7890
    ~Kevin

  • I will post a quick informative video for install on all systems this week.

    The Tesla issue has been a huge headache for production and shipping. The tesla system is a wonderful product! I had a chance over the last few weeks to use and ride it in summit county and I am very impressed with the design, engineering and overall function of the…[Read more]

  • Update:
    Our manufacture ran into some snags which delayed the delivery of our first production run. We have received all of our parts and we are in the process of assembly. We have our initial orders assembled.

    We have been testing our solutions to the Tesla issue we came across. We have modified all of the first run production Saddles to work…[Read more]

  • 1.: As mentioned before. metal on metal connection.
    RE: The spark bindings we used in most of our testing show minimal wear from the metal on metal connection. The most noticeable wear was from the sliding on and off of the Saddles. The Spark and Voile bindings we used received most of the wear from our prototypes not having the correct…[Read more]

  • My name is Kevin and I am the founder of Prowder. I want to say thank you for all the positive comments and support during our product launch. I have been very busy and haven’t had time to address the questions posted on this thread. We are putting together a video and picture series on the Prowder interface to show the capabilities and…[Read more]