Joined: Wed Oct 06, 2004 10:57 pm Posts: 5098 Location: California
First off I'd like to give a big thanks to DJ and the boys and girls at Voile for all the help with this. Second big thanks to Jeff at Catek for making an awesome product and helping grass roots riders
Here is my brand new 171 Mtn. Gun. Super Ã¢â‚¬Å“floorÃ¢â‚¬Â
Joined: Mon Nov 15, 2004 4:02 am Posts: 211 Location: somewhere in the middle of germany
Nice board! Nice mods!
Since Tuesday the same board is here in my room. And I did some work on it too ...
I just have to separate the slider on the marking-line. Then I have two pucks that overlap to the other board-half. This makes the board stiffer (ok, the Mtn Gun is stiff... so we will see) and it avoids the "up and down" of the two board-halves in riding mode.
Joined: Thu Dec 16, 2004 9:55 am Posts: 29 Location: SF Bay Area
A couple questions if you don't mind...
1. Looks like you drilled out the front slider for a 2nd pin to allow for higher angles without interfering with the touring bracket. Did you just saw off the heel "lip", drill a couple holes, and buy an extra pin?
2. Looks like you have three "parallel" center disks and one "inline" center disk. Did that help get to higher angles?
3. Do the Catek toe/heel block have a 4cm hole spacing to match the sliders without drilling? I know the F2 toe/heel blocks fit without mods, but Bomber toe/heel blocks are 5cm and need an "adapter" plate between the blocks and the slider.
By the way, a small counter-sink on the bottom of the toe/heel blocks allow the tnuts to clear without the shim. Not sure you want to start drilling out your Cateks though...
I asked Fin about the ATV inserts and he said that on his custom split 174 4wd, Chris moved the inserts closer to the center edges to allow for higher angles...
Joined: Wed Oct 26, 2005 7:46 pm Posts: 3 Location: Fort Collins, CO
bcrider, I've been trying to submit a new topic or reply to a post to no avail. Not sure what's wrong. I'm hoping you can help me out BC Rider. Here's the post I was going to send:
Dear Fellow Snowhounds,
Thanks for all the excellent information throughout the forums. I'm getting ready to make the big purchase and I'm not sure I know anymore today than after reading everything here. I know it's really hard to say here's the setup you should buy, but I'm going to give you all my specs. and see what you'd recommend.
I like freeride boards and I wear Northwave boots. From what I can gather, it seems like maybe I'd want to purchase the Burton 161 (I've been riding a 158), and the Voile split kit. What's your opinion. Should I go with Burton, Voile, or Prior, or mix and match? I've been doing backcountry with my old Liquid board and snowshoes. I'm ready to start driving a Cadillac.
By the way, I'm in Ft. Collins and plan on doing several trips on Cameron and Berthoud if anyone wants to join. Later!!
_________________ Acts 4:12
Neither is there salvation in any other: for there is none other name under heaven given among men, whereby we must be saved.
Jesus saith unto him, I am the way, the truth, and the life: no man cometh unto the Father, but by me.