Splitboard.com Forums

Hey folks. I'm interested in seeing the rocker on a lot of these new factory splits. If you've got anything, Prior, Jones, Mojo, Never Summer, Venture, etc. Split the board in half, put the skis back to back and snap some photos. It seems most of these vendors don't post photos of the side profile of their boards.

I'm particularly interested in seeing the rocker on the usual suspects. IE - Storm, Mojo RX, Solution, etc. But don't hesitate to represent the little guys too. Also, if you so desire, post a short blurb about the stiffness and/or how damp your ride is.

Venture Zephyr-R Split 169/27




http://www.bildercache.de/anzeige/20110 ... 49-755.jpg

Thanks for being the Guinea Pig and posting first Flo. This is interesting. I wasn't aware the Zephyr has 0 camber between the feet. Is this true or were you compressing the camber with your feet while taking the picture? Is this the same for the whole line of Venture boards?

In fact there is slight camber between the feet -- therefore I had to compress the halves with my feet to show the rocker.

Nideker legacy DIY

alright now, here is the never summer heritage. R.C. tech features rocker between the bindings and camber from the bindings to the tips. this first photo showcases the rocker. The board is balanced so that the nose and tail rocker are equalized. what you see here is the nose, the tail looks the same.


Here I am pressing the tips together so you can see the camber profile.

Not factory, but a DIY Mullet. She's all rocker between the legs, zero camber.

Cool stuff. Any Freebird, Solution, Storm or Mojo representation?

Winterstick ST62

Never Summer 161 SL Mega Rocker

Bentley

Do I see a swallowtail outline

Bentley,

When is NS going to begin production on the SL split? I could suuurrreeeee use one sometime this year.

Thanks,

Sam

Wow! That is a crazy shape Bentley.