Post subject: Some Burton interface parts BRAND NEW
Posted: Wed May 06, 2009 8:47 pm
Joined: Thu Nov 29, 2007 11:12 pm Posts: 22
I have some of the burton interface, brand new, unridden. I was sold some parts by a friend who was at one point the binding PLM at burton, moved back to portland, and was then liquidating excess gear for his move to tenessee. So, I have some parts, but not all, and don't really know the terminology so you'll have to forgive the incorrect jargon.
I have: - the split interface baseplates - burton 3-D discs, and the metal discs that they screw into around the split interface baseplate, and the bag they came in - the burton split crampons
I don't have any of the board joiners or ski-mode tele peices, or the discs they lock into for board mode. Nor the instructions.
Post subject: Re: Some Burton interface parts BRAND NEW
Posted: Wed May 06, 2009 9:20 pm
Joined: Fri Nov 19, 2004 8:41 pm Posts: 1620 Location: Santa Cruz, CA
FYI, those are the 2003 and earlier version of the interface plates. The '04 and later ones had a solid bar at the toe (rather than just the bent tab of metal) with a hole through it that the pin ends clamp into, and provided a much more solid connection to the touring bracket. I believe this was the only difference in the '04 version though.