Post subject: Long term durability of inside edge on DIY Split
Posted: Thu Nov 19, 2009 9:32 am
Joined: Thu Jan 04, 2007 11:41 am Posts: 62 Location: Golden, CO
I'm about to embark on my first DIY split to and think I've had all of my questions answered in most of the other threads in here. So much good info. My one concern though is regarding the long term durability of a lack of metal edge on the inside edge of each ski. This seems like the area most prone to damage either from water or an errant step on rocks or something. So obviously proper sealing of the edge is key, but is there anything else? Am I making something out of nothing here? Thanks y'all...
_________________ "It is no measure of health to be well adjusted to a profoundly sick society."
Post subject: Re: Long term durability of inside edge on DIY Split
Posted: Thu Nov 19, 2009 11:48 am
Joined: Tue Feb 26, 2008 6:27 pm Posts: 605 Location: South Lake Tahoe
I tend to sand and re-epoxy the inside edge of my DIY board every 20 or so times I take it out. My first DIY board I used 1 hour epoxy and I got water damage to the wood and eventually I broke one ski right in half. Now that board is part of my fence. Apply Marine grade epoxy sand and repeat about 3 or 4 times
_________________ If you cant duck it then fuck it