Splitboard.com Forums

The World's first exclusive splitboard discussion forums






It is currently Tue Sep 30, 2014 4:57 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: mounting plate to put dynafit bindings on voile inserts...
PostPosted: Fri Sep 12, 2008 2:59 pm 
Offline
User avatar

Joined: Fri Feb 01, 2008 3:38 pm
Posts: 250
Location: powder central, bc, canuckistan
i saw somewhere here once, someone had made some mounting plate that screwed into the voile touring bracket 3 hole inserts, and had drilled and tapped holes the plates for dynafit toepieces to be mounted....
i cant seem to find that original post on here anymore....
but im workin on getting a machinist to make me a pair....
anyone else interested???
its pretty much as easy for him to make one pair or a dozen pairs....

_________________
never summer snowboards
phantom bindings
dynafit touring


Top
 Profile  
 
 Post subject: Re: mounting plate to put dynafit bindings on voile inserts...
PostPosted: Mon Sep 22, 2008 4:04 pm 
Offline
User avatar

Joined: Tue Sep 09, 2008 12:48 pm
Posts: 213
Location: Lumby
hey, hows this going? I am scouting around to find a good deal on dynafit boots right now (just missed out on a lightly used pair for 95 bux!) . so even though i currently have no need for such a plate, i was just curious to see one...

_________________
Libtech Emmagator 165 (retired)
Never Summer Legacy 161 dynasplit


Top
 Profile  
 
 Post subject: Re: mounting plate to put dynafit bindings on voile inserts...
PostPosted: Thu Sep 25, 2008 6:38 am 
Offline

Joined: Tue Dec 25, 2007 1:07 pm
Posts: 11
Location: Grenoble, France
Hi karkis !

i am interested in this. I already monted dynafit toepieces on a Mojo, directly screwed in the board. It was great for a few monthes, but the system proved to be weak and i finally tear off on of them ...

So now, i am looking for a way to screw (or solder ?) my dynafit toepieces on a metal piece that i could screw on the board, using the touring bracket holes and screws. This metal piece could be the touring bracket itself, but i would prefer to use a dedicated lighter one, with the 3 touring bracket holes, and 4 (or ideally 5) smaller holes to screw the dynafit toepiece ...

Is that what you're thinking about ?


Top
 Profile  
 
 Post subject: Re: mounting plate to put dynafit bindings on voile inserts...
PostPosted: Thu Oct 02, 2008 1:36 pm 
Offline
User avatar

Joined: Tue May 13, 2008 12:05 pm
Posts: 51
libtechsplit wrote:
hey, hows this going? I am scouting around to find a good deal on dynafit boots right now (just missed out on a lightly used pair for 95 bux!) . so even though i currently have no need for such a plate, i was just curious to see one...


If you're looking for dynafit boots - I have a pair of dynafit TLT3's, size 28 that I am looking to sell. they're a few years old - but in good shape. I bought them to use on the splitter and decided I am just not the hard boot type.

PM me if interested.


Top
 Profile  
 
 Post subject: Re: mounting plate to put dynafit bindings on voile inserts...
PostPosted: Tue Oct 07, 2008 1:24 pm 
Offline
User avatar

Joined: Fri Feb 01, 2008 3:38 pm
Posts: 250
Location: powder central, bc, canuckistan
yeh jabby
thats zactly what im talkin bout
it sounds like Will @ Spark is gettin after it ta produce these plates, and also for the heel, to move the lift to a more practicable location...
sounds like its not far off....
pray fer snow...!!!

_________________
never summer snowboards
phantom bindings
dynafit touring


Top
 Profile  
 
 Post subject: Re: mounting plate to put dynafit bindings on voile inserts...
PostPosted: Tue Oct 07, 2008 4:05 pm 
Offline

Joined: Tue Dec 04, 2007 4:27 pm
Posts: 25
I just bumped the thread with pics of the plates. They are in the thread "NS split with inserts for dynafits"

I am not sure if the guy produced them or just made one set. They would be very handy.

Steve


Top
 Profile  
 
 Post subject: Re: mounting plate to put dynafit bindings on voile inserts...
PostPosted: Tue Oct 07, 2008 5:41 pm 
Offline
User avatar

Joined: Wed Oct 06, 2004 10:57 pm
Posts: 4956
Location: California
Here's the thread.
viewtopic.php?f=2&t=4708&st=0&sk=t&sd=a&start=26

Thanks for finding that steve-d! :thatrocks:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron





Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group