How much should it cost me to have my board cut by a waterjet? I got quoted $120 today but the guy was really confused on why i wanted my snowboard cut in half in the first place and sounded like he just threw a number out there.
I tried in Central Oregon and they said a minimum $100 charge. There is another place in HB, CA that was $20-$30. It's going to vary. If you can round up some friends and get them to keep the same fee for multiple boards, I imagine it could work. Guy here made it sound like a hassle.
It depends on the shop you are asking. If the shop has never had any experience, I can see way you were quoted so high. One of the shops I requested a quote asked me to provide the measurement specs for the board. The guy said it would take some time to input the info into his program. He seemed very nervous about performing the cut. I was referred to another shop with snowboard cutting experience. The owner said he would use a previous template and modify it to my board. I had my board cut for $62.
You might have call around to find a shop with experience or round up some friends for a bulk order as previously stated above.
Joined: Sat Nov 23, 2013 11:06 am Posts: 9 Location: Bend, Oregon
Interesting to see the huge variability between quotes. I live in Bend also and was looking into this recently and heard between $120-$150, and one guy told me flat out $200 minimum. $20-$30 sounds amazing comparitively speaking.
Exactly, I think spending over $100 for a waterjet cut is ridiculous. The guy who cut my board probably spent more time looking up the template in his computer than the time it took to cut the board. My board was ready for pickup within a hour.
Joined: Wed Feb 28, 2007 9:34 pm Posts: 266 Location: kelowna bc canada
I think 200 hr is about the going rate for waterjets. why it varies is these are filler jobs and also the fact that if you screw up a plate you shrug and throw another one on and try again, screw up the board and the owner will react abit different Once they get some experience doing it then it depends if the wants to gouge or just make abit of money on the side. Expect to pay a premium if they're busy though.
Had a guy do it for $10 board near flagstaff. He fucked up two boards and got two done almost perfect. Turned out the tip of his water-jet was bent? Make sure the guys you go to are confident and a test board or two is good.