I have size 10 boot I bought a medium size split30 binding going off of the size recommendation the problem is I cant center boot over the binding it has about a .75 inch over hang on heel edge and about .25inch on the toe. I made all the adjustments I could on the binding end but I just can't center it is it possible I might need a size small binding? Even though size recommendations say small is for size 6-8?
I'm in a Burton Driver X in a 10.5 and I have Split30s in medium and think that I might have been better off with large, I really doubt you need a small. It might be worth double checking to make sure you actually have medium bindings and not large by accident.
Joined: Fri Feb 22, 2008 6:51 am Posts: 657 Location: Surfing or Splitboarding Downunder
Had the same issue with a set. Emailed the brothers and they sent me the instructions to fix. From memory you do the opposite adjustment of what you think is right and they fit Took a good hour to sort our. After you setup a few boards you get the hang of it.
Also some manufactures don't put the binding holes in as per the standard Voile spacing so this can cause issue too.
Good luck, email them for the step by step instruction
_________________ Adam West Board Designer FirstLight +61 (0)413 888 115 http://www.firstlightsnowboards.com.auhttp://www.splitfest.com.auhttp://www.splitfests.comhttp://www.mrbc.comhttp://www.backcountryglobal.com Sydney - Nowra - Jindabyne