Hey, I searched through all the pages of this forum for answers, but couldn't find anything definitive. There are a couple of pairs of medium sparks for sale in the swap right now, and I'm trying to figure out if I should go M or L for my size 10.5 2012 32 TM2s. The boot has a noticeably smaller footprint than all my older TM2s (only boot and size I have used for probably 10 years now). Thanks for any advice!
PS- Looking to upgrade from the old C60's I'm currently running on the splitty.
Joined: Sat Mar 19, 2011 6:48 pm Posts: 675 Location: Kodiak, AK
I ride 10.5 Burton Driver X boots with size large Spark Burners. The heel cup and toe strap positions are adjustable and I am roughly in the middle of the range. Mediums may have worked but I am happy with how my boot sits on the platform and the location of the toe ramp with the large bindings.
_________________ Jones Solution 163W Venture Zephyr 164/260 Never Summer SL 163X Burton Spliff 148 Voile Mojo RX 166 BD, G3, and Gecko skins Sparks!
Joined: Tue Jan 11, 2011 3:39 am Posts: 10 Location: Bratislava, Slovakia
I have both M and L sized Burners are home for some time (M was for friend), so had a chance to compare them carefully. Basically the only difference I found on the baseplates was width, length wise they were identical. Straps were marked M and L respectively, if there is any difference there, I'd say it's not that big as well.
So it really is a matter of width (bulkiness) of the boots you plan to use.
10.5 Driver X, I opted for L and I like the fit (though did not have time to get on the snow yet, so all my findings are based on the looks)
_________________ Jones Solution 164, Spark Burner LT, Burton Driver X kiting while waiting for some real snow dump
Joined: Sat Dec 15, 2007 5:44 pm Posts: 712 Location: The Magic City
How do you tell what size Sparks you have? I rock the Blazes and a 10.5 OG Spark boot. I never needed to adjust anything and they fit like a glove in the binder... but like I said, I'm not sure what size they are.
Thanks for the info, sounds like I should just go with large to be safe. 10.5 is always right in between... I've always used large conventional bindings. Straps tightened almost all the way down, but better than toes way off the end. One good thing about 10.5 boots is they can still fit on a normal waist board !
Large is definitely the safe way to go. I took a chance on a good deal for medium 2011/2012 burners to go with my size 11 Burton Rulers. I'm not at the end of the adjustment range but i think 1 hole before the last. For a larger profile, stiffer boot with vibram soles line the Spark Deeluxe I think I'll be out of luck but medium works fine for what I have now. To be honest I was more worried about the pivot position underfoot than I was about the straps closing but everything feels great.
I'm in the market for new boots now and will be looking for something stiffer, so I'll try to remember to keep you posted.