Forums Splitboard Swap ROSSIGNOL EXPERIENCE 163 – VOILE DIY $450 or B.O.
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #576637
    Maxwell Morrill
    19 Posts

    Rossignol Experience Magtek Snowboard 2013 with Voile DIY kit and Voile Skins and Voile Crampons! – $450.00 :rock:

    DIY SPLITBOARD WITH ‘CUSTOM’ VOILE DEMO KIT, (ONE OF A KIND)*
    *Mounted for adjustable degree stance, ready for goofy or regular riding style.

    Rossignol Experience Retails for $499.00
    Voile Kit for $140.00
    Skins $150
    Crampons $110

    Normally $900.00
    Your’s for $450.00

    A STEAL AT THIS PRICE!

    KSL AD.
    http://www.ksl.com/index.php?nid=218&ad=24380198&cat=193

    Ability Level: Advanced-Expert
    Flex Rating: Very Stiff
    Core Material: Foam, Wood
    Rocker Type: Rocker/Camber/Rocker
    Width: Regular
    Athletes: Xavier De Le Rue,

    Board Specs:
    The Chevrolet Corvette Sting Ray of snowboards, the Rossignol Experience MagTek Snowboard is breaking new ground. With it’s Magne-Traction 7M edges and THC CBF2 core, the Experience MagTek is truly on the cutting edge of the snowboard industry. A flex rating of 10 out of 10 makes this board the perfect ride for tearing down big-mountain lines. As legendary as the Sting Ray’s split rear window, the Rossignol Experience MagTek’s industry defining technology and look are sure to make you the next iconic snowboarder
    Rocker Type
    AMPTEK All-Mountain – A combination of 60% Rocker and 40% Camber gives you more control, stability, edge pressure and smoother landings due to the rocker profile in the nose and tail and camber profile under the bindings.
    Flex
    Super Directional – Extremely stiff under the back foot gives you maximum control, while a medium-stiff flex at the front foot allows for smoother turns. A stiff waist gives more stability at higher speeds.
    Flex Rating (1 Soft – 10 Stiff) – 10, perfect for big mountain riding
    Sidecut
    Directional Twin – A stiff tail for punch on kickers and solid landings with a softer waist and nose for smoothness
    Core
    THC CBF2 – Triple Hybrid Core infused with CBF2: two types of wood and three Microcell beams are laminated and combined with two strips of basalt (CBF2) to deliver lighter weight with increased balance, control and edge grip.
    Laminates
    CBF2 – A single strip of Continuous Basalt Fiber (CBF) runs along the length of each edge of the board delivering superior grip, excellent stability, magnanimous pop and smooth edge-to-edge transitions. Basalt has a strength-to-weight ratio that exceeds that of fiberglass by a factor of 1.5 and has longer elongation at break than carbon fibers.
    Dual Torsion Box – The core is split into three parts: the two outer sections and the middle section. The two outer sections are wrapped in a sock of fiber glass while two strips of Basalt and Aramid are added. Then, another full layer of glass fiber wraps around the entire core. You end up with unmatched stability at high speed, inifinite durability, incredible edge grip and the smoothest edge-to-edge transitions.
    Glass Fiber – Glass has greater elongation before break than carbon and comes in multiple weights and weavings, making it the #1 Choice for customized flex and torsional resistance. Glass fiber also stabilizes the mechanical properties of the wood core over time.
    Aramid (a.k.a. Kevlar®) – Systematically used in conjunction with Carbon and Basalt to deliver excellent shock absorption
    Base
    Sintered 7500 – A super high density UHMW (Ultra High Molecular Weight) sintered base with a stone finishing gives the board the fastest and most durable base to date.
    Edges
    Magne-Traction 7M – Featuring 7 deeps bumps distributed along the edges to maximize the edge pressure between the feet, bringing the once unreachable “dead area” of the board back to life for added control and stability even in the gnarliest conditions
    Graphics
    Illustration by Tim Phibs

    #653798
    Splitinbend
    243 Posts

    Lets see some photos of that bad boy

    #653799
    Maxwell Morrill
    19 Posts

    Here is a link to the KSL post with pictures.
    http://www.ksl.com/index.php?nid=218&ad=24380198&cat=193

    Looking to sell this soon…

    Let me know with a PM or response to the KSL ad.

    Thanks.

    #653800
    firstlight
    721 Posts

    Maxwell Morrill

    That’s the first DIY I’ve seen done with the old Voile interface that way.

    :headbang: :headbang: :headbang: :headbang:

    Great idea

    Adam West

    www.firstlightsurfboards.com.au
    www.firstlightsnowboards.com.au
    www.splitfest.com.au
    www.snowsafety.com.au
    www.mrbc.com.au
    www.backcountryglobal.com
    www.alpinefirstaid.com.au

    #653801
    Maxwell Morrill
    19 Posts

    @firstlight wrote:

    Maxwell Morrill

    That’s the first DIY I’ve seen done with the old Voile interface that way.

    :headbang: :headbang: :headbang: :headbang:

    Great idea

    Thanks firstlight. It makes sense for what I originally built it for as a demo board for taking people out and having the ability to just switch from reg to goofy. It rides great too!

    #653797
    Maxwell Morrill
    19 Posts

    BUMP…Added some more goodies…Buy now, you know you want it!

    #653802
    rvandi
    10 Posts

    I know I am late but wondering if this pkge is still for sale?

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.