Forums Splitboards Voile Puck setup problems Viewing 3 posts - 1 through 3 (of 3 total) Author Posts February 25, 2012 at 2:03 pm #576469 Matt Wood 328 Posts So on all of my DIY’s my binders slip on with ease but I’ve sut up my Mojo’s around 10 times and they take every bit of strength I have to get on and off. Anyone ever experienced this. It’s driving me crazy and it’s my only board for a while as I broke my DIY last weekend. February 25, 2012 at 4:06 pm #652176 philip.ak 679 Posts I use the plastic setup template to get the pucks close to set, then I slide the binding onto the heel puck and as it approaches the toe puck I pay very close attention to how the binding and puck align. Usually the binding slides onto the heel puck no problem but gets progressively tighter moving over the toe puck. I do the final toe puck adjustments through a bit of educated trial and error. February 26, 2012 at 2:03 pm #652177 Matt Wood 328 Posts ^^^^ Thanks. I ended up using an engineers square to true them up. Something is weird with my setup. Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.