Forums Splitboard Swap Phantom Bindings – 1st Generation (2012-13) – Size L – $225
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #579356
    dr. mahkman
    18 Posts

    Phantom Splitboard Bindings up for grabs

    THE best binders available for hardboot splitting
    Made in Colorado
    First generation (2012-13) model
    Size L – fits AT boots size ~28-30 mondo
    Interface mounts on factory-built boards only (not DIYs)
    Used 1 season
    $225

    PM if interested

    #673257
    dr. mahkman
    18 Posts

    Lots of questions about sizing…here’s the deal:

    They are currently fitted for a 28.5 Scarpa Rush which has a 322mm sole length. The bindings still allow for the toe bails to be adjusted 10mm in, and the toe and heel bail blocks can each be adjusted another 5mm. So that means they will fit a minimum sole size of 302mm snugly. Any smaller than that and you’d probably want the mediums.

    #673258
    _ZakMills
    72 Posts

    Have you sold the bindings?

    #673259
    dr. mahkman
    18 Posts

    @Earnyourturn wrote:

    Have you sold the bindings?

    Still available. Selling them with extra detent pins (this is the locking mechanism for binders to board cleats).

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.