@dgg active 5 months, 1 week ago ActivityProfileFriends 0Groups 0ForumsMedia 0 PersonalMentionsFavoritesFriendsGroups Show: — Everything — Updates rtMedia Updates Friendships New Groups Group Memberships Group Updates Posts Comments Topics Replies dgg replied to the topic Are Mervin Splitboards Bad? in the forum Splitboards 5 years ago That part’s easy; unless you end up buying one of the really old Burton proprietary system ones used, everyone uses the same mounting pattern on factory splits. I guess I should say that I’ve never tried to mount Karakorams on a board with channels (some newer K2, Viole, and Burton), but from what I can tell it should be doable with a bit of…[Read more] dgg replied to the topic The 2016/2017 Gear Thread in the forum Splitboard Talk Forum 5 years ago Are these not just the same goofy-ass rec ski boots that Apex has been selling for the last five or six years? -Daniel dgg replied to the topic Salomon & Burton wide boot sizing help in the forum Boots 5 years, 3 months ago I usually wear a 9.5 wide in street shoes, and find that Salomons fit my V shaped foot really well: narrow heel, wide toe box. I personally found them to fit better than the wide Burtons, which were great at the toe box but too sloppy at the heel. -Daniel dgg replied to the topic FS: Burton S-Series 165, Full setup $225 obro in the forum Splitboard Swap 5 years, 3 months ago by Daniel García-Galili[/url], on Flickr by Daniel García-Galili[/url], on Flickr by Daniel García-Galili[/url], on Flickr by Daniel García-Galili[/url], on Flickr by Daniel García-Galili[/url], on Flickr by Daniel García-Galili[/url], on Flickr by Daniel García-Galili[/url], on Flickr by Daniel García-Galili[/url], on Flickr dgg replied to the topic FS: Burton S-Series 165, Full setup $225 obro in the forum Splitboard Swap 5 years, 3 months ago by Daniel García-Galili[/url], on Flickr dgg replied to the topic FS: Burton S-Series 165, Full setup $225 obro in the forum Splitboard Swap 5 years, 3 months ago The whole setup is in decent shape; I was riding it till I put it away, but I wasn’t beating it up. Skins still work fine but the glue is getting a bit uneven; I’d include a fresh tube of Black Diamond Gold Label just in case. Feel free to PM if you want more details. -Daniel dgg replied to the topic FS: Burton S-Series 165, Full setup $225 obro in the forum Splitboard Swap 5 years, 3 months ago The whole setup is in decent shape; I was riding it till I put it away, but I wasn’t beating it up. Skins still work fine but the glue is getting a bit uneven; I’d include a fresh tube of Black Diamond Gold Label just in case. Feel free to PM if you want more details. -Daniel dgg replied to the topic FS: Spark Magneto 275 + shipping in the forum Splitboard Swap 5 years, 4 months ago Size? dgg replied to the topic FS: Burton S-Series 165, Full setup $225 obro in the forum Splitboard Swap 5 years, 4 months ago Sorry guys, stopped getting notifications on this at some point I guess. Yes, this is still available. -Daniel dgg replied to the topic FS: Burton S-Series 165, Full setup $225 obro in the forum Splitboard Swap 5 years, 4 months ago Sorry guys, stopped getting notifications on this at some point I guess. Yes, this is still available. -Daniel dgg replied to the topic Looking for a set up in the forum Splitboard Swap 6 years, 1 month ago I’ve got an old Burton S-Series (with the old Burton system), complete with skins, $150 plus shipping. Just add bindings, works with anything with a 4×4 or 3D screw pattern. dgg replied to the topic WTB Splitboard set up 161ish in the forum Splitboard Swap 6 years, 1 month ago I’ve got an old Burton S-Series (with the old Burton system), complete with skins, $150 plus shipping. Just add bindings, works with anything with a 4×4 or 3D screw pattern. dgg replied to the topic splitboard.com t-shirts in the forum Re: Re: splitboard.com t-shirts 6 years, 4 months ago 3rd for XL if you’ve got any left. Summer doesn’t seem to have done us any good. -Daniel dgg replied to the topic FS: NIB Smith I/O $125 in the forum DIY and Mods 6 years, 10 months ago I/O. Sorry, that was plural not the type of goggle. They are the original, middle-of-the-size-range I/O goggle. -Daniel dgg replied to the topic FS: NIB Smith I/O $125 in the forum DIY and Mods 6 years, 11 months ago *bump* dgg replied to the topic Canted Voile Universal Splitboard Hardware Puck Set ??? in the forum Re: Re: Canted Voile Universal Splitboard Hardware Puck Set ??? 7 years ago @Powder_Rider wrote: I had to sand / file (< 1/2mm) down my older Voile Slider tracks to get the bindings to slide easily over the new Voile canted pucks. So I found that both my Blazes and my girlfriend’s Voile plates slid way more easily on my canted pucks than on her (almost brand new) flat pucks. Not sure if that’s a difference between the…[Read more] dgg replied to the topic Canted Voile Universal Splitboard Hardware Puck Set ??? in the forum Re: Re: Canted Voile Universal Splitboard Hardware Puck Set ??? 7 years ago @FrankH wrote: I’ve searched around a bit, but thought I’d ask here. Is anyone having issues using these with spark binders? It seems like the wider base of the sparks vs voile plates could cause the baseplate to come in contact with the topsheet. @dgg wrote: K2’s Ultra Split kit ships with a version of these, although somewhat modified to allow… [Read more] dgg replied to the topic Someone finally listened, K2 Ultra Split? in the forum Re: Re: Someone finally listened, K2 Ultra Split? 7 years ago I’ve been riding one all season (or what’s passed for a season here in southern Vermont). It’s my first Voile system board after coming off the old Burton system, so my ability to compare it to anything else is limited. That said, I’m pretty pleased so far. I’m a fan of the easy stance angle and width adjustability as I get the whole thing…[Read more] dgg replied to the topic Question regarding pucks nonevolution in the forum Re: Re: Question regarding pucks nonevolution 7 years, 1 month ago @Killclimbz wrote: ICS has it’s problems unfortunately. I would guess that by the nature of how the design would have to be done, it might actually work better for a snowboard. Of course Burton ain’t going to let that tech go to other guys for cheap… I mean, K2 has a channel setup on the Ultra Split this year, and it looks identical to the ICS…[Read more] dgg replied to the topic Canted Voile Universal Splitboard Hardware Puck Set ??? in the forum Re: Re: Canted Voile Universal Splitboard Hardware Puck Set ??? 7 years, 1 month ago K2’s Ultra Split kit ships with a version of these, although somewhat modified to allow for the channel-style mounting on this board. Haven’t had a ton of chance to ride it, but since I ride canted bindings on my resort board, these pucks plus a set of Blazes feel pretty comfortable to me. -Daniel Load More